Oil Tolerant Threadlocker Medium Strength 50ml

This adhesive 50 ml is a 1-K anaerobic, medium strength threadlocker which prevents loosening of cylindrical parts attached to bold. Can be used on wave, cogwheels, bolts and cylindrical joints. This adhesive is used both in workshops as well as in industries. The product is highly effective when applied to close fitted metal surfaces without air access.

Technical specifications:
Suitable for all metal surfaces.
Clearance up to 0.1 mm
Tolerant to slight oil contamination.
Disassembly with hand tools possible.
Tensile shear strength: 26 N/mm².
Operating temperature range: -55°C to +200°C.
Solidity: starts to harden as from 10 minutes, up to 6 hours when maximal result is attained.

Application: 
Shake properly before use and apply to the entire periphery of a fixed element. It is recommended to apply the product on both parts to be joined. Immediately after application, put both parts together. These parts should not move before maximum result is attained.

Warnings: 
Danger! Sticks together skin and eyes within seconds. Keep out of the reach of children. Irritating to eyes, respiratory system and skin. Do not breathe vapor. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.