Mega Bond, Steel Plasticine 72g

DE EN

Show all bestseller

Description

Mega Bond Steel Plasticine is used to repair heavy-duty components. It is used for filling of cracks, leaks, holes, seals and bumps.

After 15 minutes, the mass is as hard as steel, and after an hour, can be drilled, painted on, amongst other things.

Technical specifications:
Tensile strength: 60 bar
Heat resistance after drying: + 93 ° C without contact with liquids + 168 ° C
Hardness Shore D 82

Application:
For the best result, the intended surface should be properly cleaned and degreased with acetone, for example. If it is possible, the surface should be roughened with sandpaper.

After preparing the surface, the required amount is taken out of plasticine from the tube and cut. Then the mass is kneaded for about 1 to 2 minutes until a uniform color is obtained. This indicates that the two major components have been thoroughly mixed.

After mixing, the dough is coated on the surface to be treated and the excess mass is scraped away. Solidity begins after about 5 minutes and the optimum solidifying temperature is at 21 ° C.

At higher temperatures this process is shorter and the full strength is achieved after 24 hours.

Hazard-determining components of labelling: Warning. reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight -

Hazard statements: Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects.

Precautionary statements: Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Immediately call a POISON CENTER/ doctor.

further safety instructions: Contains epoxy constituents. May produce an allergic reaction.