Black Bumper Structure Spray 400ml

DE EN

Show all bestseller

Description

Black Bumper Structure Spray 400ml is a quick-drying paint for black plastic car parts such as bumpers. When spraying bumpers, no primer is needed. The varnish forms a mechanical and surface-protective layer covering and producing a natural appearance with a plastic mimicking structure.

Application:
The surface to be treated must be clean and dry. Those areas which do not need to be treated are to be covered.
Shake canister properly before use. The surface is sprayed from a distance of about 20-30cm. In a situation, where a second layer is desired, one should do that within 5-10 minutes of first application. After 1 hour of application under 20°C, coating starts drying and complete dryness occurs after 12 hours.

Hazard-determining components of labelling: Danger

Hazard statements: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. Causes serious eye irritation. Harmful to aquatic life with long lasting effects.

Precautionary statements: Keep out of reach of children. Keep away from heat. - No smoking. Do not pierce or burn, even after use. Do not breathe mist/vapours/spray. Do not spray on an open flame or other ignition source. Use only outdoors or in a well-ventilated area. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container to a waste container.

further safety instructions: EUH066 Repeated exposure may cause skin dryness or cracking. Buildup of explosive mixtures possible without sufficient ventilation.