Acrylic Clear Coat 400ml

DE EN

Show all bestseller

Description

Acrylic Clear Coat, 400ml is a fast-drying, efficient and transparent lacquer with excellent traction and resistance to mechanical influences. Ideally recommended as a protective coating for metal, wood, plastic, paper, brick, plaster and other surfaces.

Application:
Degrease, clean and dry the surface about to be treated and those areas which do not need to be treated are to be properly covered.

The spray can must be well shaken for about 2-3 minutes before use. The color should be tested on an inconspicuous area and the result be checked before use.

The surface is sprayed from a distance of about 30cm. The coating is dust-dry after 30 minutes, dry after 2 hours and after about 24 hours, completely dry.

Hazard-determining components of labelling: Danger contains: butan-1-ol, acetone

Hazard statements: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness.

Precautionary statements: Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. Do not breathe spray. Do not spray on an open flame or other ignition source. Wear eye protection / face protection. Use only outdoors or in a well-ventilated area. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container to a waste container.

further safety instructions: EUH066 Repeated exposure may cause skin dryness or cracking.